Only camera models with 2G or 3G modems can be configured using SMS commands.
User can configure the device from the smartphone using SMS. Messages will be received and processed if and only if the camera is in an active state. The camera is in an active state in two cases:
Please note, SMS processing must be enabled in the Mobile App settings. This feature is disabled by default.
An SMS command is ASCII in the following form
command parameters
Commands can be listed using the (;) character without spaces
command;command;command
The result of each command is sent separately. No field can contain the (;) character.
Attention! Avoid using spaces at the beginning of the command, otherwise it will be incorrect.
Related articles